Skip to main content
Figure 9 | BMC Neurology

Figure 9

From: Introduction of a new model for time-continuous and non-contact investigations of in-vitro thrombolysis under physiological flow conditions

Figure 9

Rating curves to convert the measured pressure declines into lysis rates. Every measured pressure decline can be assigned to a lysis rate considering different flow velocities. Thereby pressure declines recorded under different hydrodynamic conditions can be compared. For pulsatile flows the mean velocity should be used. The underlying data are gained by the same measurements as conducted for the calibration curves (Figure 7).

Back to article page

BMC Neurology

ISSN: 1471-2377

Contact us